Precisely Pure

Airgle

The Airgle countertop water filtration system (WG500) is designed to offer an endless supply of healthy, great tasting water. The system is equipped with two carbon filters and one Ultra Filtration filter to reduce contaminants while simultaneously leaving healthy minerals in to improve the quality and taste of the water. With a triple filter monitoring system and a patented quick change filter design, the WG500 offers a tremendous value and is one of the easiest systems to use and maintain.

How It Works

The WG500 is a 3-stage water filtration system. Water is first filtered by a carbon pre filter. The water then moves through the ultra filtration membranes. Lastly, the water is filtered by the second carbon filter. The result is clean, healthy and great-tasting water.

Hollow fiber type membranes
with KDF (100g)

Read more

Lead reduction
Carbon Block
with a prefiltration
medium Read more

Chloramines reduction Carbon Block with a prefiltration medium and scale inhibitor

Read more

Stage 1

X Reduces:
  • - Sediment down to 5 micron
  • - Organic chemicals
  • - Volatile Organic chemicals (VOCs)
  • - MTBE (methyl tert-butyl ether)
  • - Lead, Mercury
Capacity:
  • - 300Gallons (max. 6 months)

Stage 3

X Reduces:
  • - Sediment down to 1 micron
  • - Organic chemicals
  • - Volatile Organic chemicals (VOCs)
  • - Chloramines - the by-product of chlorine and
     ammonia used in water disinfection
  • - Chlorine resistant cysts like giardia and crypto
     sporidium and Turbidity.
  • - Built-in Scale inhibitor
Capacity:
  • - 300Gallons (max. 6 months)

Stage 2

X Reduces:
  • - Sediment down to 0.1 micron
  • - Cyst, Bacteria
  • - Water-soluble heavy metals, and control scale,
  • - bacteria and algae
Capacity:
  • - 2,000Gallons (max. 12 months)

How to Install

The Airgle Countertop Purification System has two simple installation methods.
X Installation Overview

Before you begin, close the water supply valve that feeds cold water to your tap. Then, open the faucet to drain the sink's cold water pipe.

Method1

1. Unscrew to remove the aerator (wire screen) and washer from the end of the faucet.

2. Position the diverter valve onto the faucet and hand-tighten the textured collar counterclockwise until secured.

1. Unscrew to remove the textured nuts.

2. With the threads facing out, push the nuts onto the tubes.

3. Firmly push the tubes onto the barbs.

4. Screw the nuts onto the barbs and hand-tighten.


You are now ready to turn the water main back on. As the system fills, check for leaks and make sure that everything is properly connected. To flush the system, run the water for about 2 minutes. Initially, you may notice some carbon dust in the water. This is normal and harmless. After flushing the system, you should be able to check the clarity of the water in a clear glass.



X Installation Overview

Before you begin, close the water supply valve that feeds cold water to your tap. Then, open the faucet to drain the sink's cold water pipe.

Method2

1. Insert base cover and gasket onto mounting bolt on faucet.

2. Insert mounting bolt through the drilled hole in the fixture.

3. Place washer and lock washer and fixing nut onto the mounting bolt. Position
tube outlet deco on fixture, then tighten nut securely.

4. Insert standard tube insert

Key Features

  • Countertop drinking water system
  • One-touch dispensing technology
  • Three-stage advanced filtration
  • Triple filter life monitoring system
  • Removes chlorine taste and odor
  • Removes sediment and turbidity
  • Removes chloramines
  • Removes lead and mercury
  • Removes cysts such as
    giardia and cryptosporidium
  • Removes Particulate Class I
  • Removes VOCs and MTBE
  • 0.5gal/min @ 60 PSI
  • 500-2000 gallons cartridge life
  • Easy installation
  • Quick-Connect fittings
  • Does not produce any waste water
  • Installation kit included
  • One-year limited warranty